Features
Due to its modular design, the MFK 700 is a cost-saving multitalent:
simply
change the router base, rather than reaching for a different tool, and
you‘ll be equipped to handle any tasks involving edges and corners.
Attach the appropriate base in a few simple steps – and you‘re ready to
trim veneers or rout grooves straightaway. Or round-over edges, or
create edge profiles, or do many other things... Work safely and achieve precise results.
With
its large support base and additional hand grip, the MFK 700 can be
optimally and safely controlled – without tilting, even when routing
around corners.
Always easy, always clean.
The
parallel side fence with fine adjustment delivers perfect corners.
Improved tool performance and a clean workplace: the dust extraction
system – positioned directly on the base – removes chips and dust
without getting in your way.
Perfectly adjusts to any material.
Be
it fine-tuning the routing depth to 1/10 mm or matching tool speed to
material through electronic speed control: the MFK 700 can be precisely
adjusted to meet your needs.
The perfect router base for veneer edge projections.
The
router base is inclined 1.5° to facilitate safe routing of laminated
boards. The 90° base cut-out facilitates quick flush trimming of
gluedon veneer – even around corners.
- 720watt Motor
- Tool-Less Base System - Quick, Easy Base Changes From Horizontal to Vertical Applications
- One Motor, Two Bases - Take Full Advantage of modular Design
- super Fine Micro-Adjustments in 1/256" (1/10mm) Increments
- Multiple Dust Extraction options
- 1.5 degree Horizontal Base Incline Provides Perfect Results With Edge Routing
- Available As Basic Model Without Horizontal Base System.
- Suits a wide range of applications due to
changeable router bases - Simple adjustments for fast setup and routing
- Electronic speed control for optimum adjustment
to any material - Thermal overload protection for long service life
- Large support surface for precise results
Smarter
Work safely and achieve precise results. With its large support base and additional hand grip, the MFK 700 can be optimally and safely controlled. The optional Parallel Edge Guide with fine adjustments delivers perfect results when rabbeting or making dadoes parallel to the edge of the workpiece.
The tool-less base system maximizes the advantage of the modular design with simple, intuitive component changes.
Easier
Obtain perfect results every time! the tool less horizontal router base is inclined 1.5 degree to facilitate safe routing of edge banding requiring no additional finish work. the V-shaped cut-out of the base and sensor bearing guide provide quick flush trimming even around corners.
The MFK 700 can be precisely adjusted to meet your needs with 1/10 millimeter adjustments to the depth of cut.
Faster
Due to its modular design, the MFK 700 is a cost-saving multipurpose tool: quickly change the router base, rather than reaching for a different power tool, and you'll be equipped to handle a wide range of routing applications. attach and remove all of the components of the MFK without using a tool.
The MFK 700 with its 720 Watt motor will quickly become the most versatile tool in your shop.
Tool-Less Base System
Quickly and easily change between the horizontal and vertical bases supplied with the MFK 700. All components of the MFK 700 router set can be attached and removed without tools.
Simply give the locking knob a few quick turns to loosen or tighten the locking mechanism for bases. Increase productivity with the modular design of the MFK 700 base system. One router motor, multiple routing applications.
Swivel dust Extraction Connector
Festool engineers paid attention to every detail when designing the MKF 700. The standard swiveling dust extraction connector is no exception.
The swivel connector allows the dust extractor hose move freely and prevents binding.
Applications
- Routing solid wood, acrylic and PVC veneer
- Bevelling, rounding and profiling edges
- Cutting grooves or trenches with the parallel side
fence with fine adjustment - Cabinet Makers - trimming veneer, edge banding, laminate, edge forming, grooving
- Countertop shops - trimming laminate, finishing edges, trimming banding
- Professional Woodworker - veneer projects, light duty routing to include decorative edges, profiling, rabbets
- Hobbyist - light duty router for common applications like edge forming, grooving, rabbets.
Specifications
- Power Consumption - 720 watts/ 6 amps
- no-load Speed - 10,000 - 26,000 RPM
- Depth - 14mm (35/64")
- Fine adjustment - 1/10mm (1/256")
- Hose connector - 27mm (1-1/16")
- Collet Range - 1/4", 8mm
- Weight - 1.9 kg (3.0 lbs)
|
