Cordless Drills. Different by Design.
Cordless drills look different, because they are different. Crafted to the highest level of German engineering, Festool cordless drills offer a level of quality not found in other cordless drills. From the EC-TEC brushless motors, to the interchangeable Centrotec and FastFix chucks, these cordless drills were designed to work the way you work.
The Festool T+3 offers greater torque than competing drills, even those with greater voltage.
Learn how the T+3 is Five Drills in One.
Cordless Drills. Five Drills in One.
Thanks to Festool's innovative FastFix chuck system, the T+3 cordless drill is incredibly versatile and does the work of five drills in one. (1) The eccentric chuck is perfect for corners and against adjoining edges. (2) The keyless drill chuck can be used with drill and driver bits up to 1/2" in diameter. (3) For lighter weight and a more compact footprint, use the smaller, lighter Centrotec chuck with its full array of interchangeable drill and driver bits. (4) The most unique is the right-angle chuck which provides a 90° angle to the drive motor for tight spaces. The eccentric and right-angle chucks can both swivel a full 360 degrees with 16 locking positions. (5) The optional depth stop chuck provides consistent, precise depth settings regardless of work piece material. If that's still too few options, you can also use standard hex driver bits in the drill with no chuck attached. The T+3 cordless drill set includes all chucks except the depth stop chuck.
Learn how the T+3 brings the power.
Cordless Drills. Bringing The Power.
All the versatility of the T+3 cordless drill is combined with a robust design that features a long-lasting, energy efficient brushless motor, compact transmission, and electronic health monitoring. Brushless motors offer significant advantages over motors with brushes, including higher efficiency and reliability, reduced noise, and longer service life to name a few. This helps the T+3 cordless drill outperform other drills that would otherwise be in the same class. Nearly all of Festool's power tools feature intelligent electronic monitoring and feedback which makes the tool smarter. In the case of the T+3, this technology protects the motor from overload, provides an electronic (rather than mechanical) clutch feature, and an intelligent drill mode with an electronic clutch override, as well as other innovative features.
The T+3 is able to achieve greater torque than competitors at a given rate of power consumption.
Cordless Drills. Not All Lithium Ion Batteries Are Created Equal.
With the T+3 cordless drills, Festool goes Lithium Ion. The T12 & T15 are the culmination of the best technology available today, with features unique to Festool. Lithium Ion technology and the use of a brushless motor combine to create a lighter and more powerful drill. The T+3 cordless drills offer some of the most advanced battery technology available for portable power tools. Battery cells are carefully tested and selected to find matched sets to enhance cell balancing, a technique which ensures equal charge and discharge cycles thus prolonging battery life and efficiency. All of this, coupled with the inherent advantages of Lithium Ion technology, is backed by an unprecedented 3-Year Warranty on the batteries, charger and drill.
Do more drilling and driving on a single charge with the T+3 compared to competitors.
Learn how the T+3 cordless drill makes you work - Faster. Easier. Smarter.
Faster. Easier. Smarter.
- Change chucks quickly and without tools using the FastFix chuck system.
- Drill and drive rapidly with the high RPM motor.
- Drill, countersink, and drive screws in less time with the Centrotec bit change system.
- Five tools in one with FastFix and Centrotec chuck system.
- Easily access tight spots with the compact design and specialty chucks.
- Increased comfort during extended use due to ergonomic, well-balanced, and lightweight design.
- One drill + five chucks = complete drilling and driving solution.
- Optimal run times, consistent power at any speed, and longer service life with integrated electronic controls.
- Longer battery life and increased productivity with the highly efficient motor.
Take An In-Depth Look At The T+3 Features.
FastFix Chuck System
Possibly the most innovative feature of any cordless drill on the market, the Festool FastFix chuck system allows you to use any of the five Festool specialty chucks with your drill. Chucks can be swapped quickly and easily. The T+3 Set comes standard with the Centrotec, Eccentric, Right Angle and Drill chucks (shown above the drill). An optional Depth Stop chuck is also available.
Standard Package Includes T 12 + 3 T 15 + 3
TRC 3 Charger
Two (2) Lithium Ion Batteries
FastFix Right Angle, Eccentric and ½" Drill Chucks
Centrotec Starter Set
Systainer SYS 2 w/ Storage Compartment SYS 2 w/ Storage Compartment
Specifications
Time to Full Charge 70 mins. 70 mins.
Max. Torque in Steel 265.5 in-lbs. (30 Nm) 354 in-lbs. (40 Nm)
Max. Torque in Wood 220 in-lbs. (25 Nm) 238 in-lbs. (27 Nm)
Torque Setting Range 4.4 - 70.8 in-lbs. (0.5 - 8 Nm) 4.4 - 70.8 in-lbs. (0.5 - 8 Nm)
Chuck Capacity Up to ½" (13 mm) Up to ½" (13 mm)
Weight 3 lbs. 1.4 oz. (1.4 kg) 3 lbs. 4.9 oz. (1.5 kg)
Product Number 564 247 564 250
Additional NiCD, NiMH or Lithium Ion batteries. The T+3 cordless drill and the included TRC 3 charger are compatible with older Festool batteries.
10.8 Volt, 2.6 Ah Li-Ion 495 479
14.4 Volt, 2.6 Ah-Ion 495 480
12 Volt, 1.3 Ah NiCD 494 518
12 Volt, 2.4 Ah NiCD 494 520
12 Volt, 3.0 Ah NiMH 494 522
Centrotec Bits
Centrotec Bits
Product No. (Varies)
See our Festool Cordless Drills page for a complete selection of Centrotec drill and driver bits. Centrotec offers high quality fit and finish, precision, durability, and versatility. Festool offers solutions for pre-drilling, countersinking, and centering, as well as long lasting bit tips. Our HiQ bit tips are engineered for maximum wear-resistance and edge retention, ensuring a better fit, drive after drive.
TRC 3 Battery Charger
TRC 3 Charger
Product No. 495 227
Replacement battery charger. The TRC 3 charger is capable of charging Festool NiCD, NiMH and Lithium Ion batteries. It features intelligent monitoring electronics that protect the batteries from being overcharged or charged in hazardous conditions.
Depth Stop Chuck
Depth Stop Chuck
Product No. 493 539
The Depth Stop chuck, sold separately, offers consistent, precise depth setting regardless of material. Integrated clutch maintains depth independent of torque setting. Quick-out ring backs out screws without affecting depth setting.
Sortainers
Sortainers
Product No. (Varies)
Store, organize, and transport all of the items used with your T+3 Cordless Drill. Perfect for drill bits, driver bits, screws and more. Sortainers are part of the Festool storage system and can latch together for easy portability. Available in various configurations. See our Festool Cordless Drills page for details.
|
|
|
