 |
 |
 |
|
Hitachi NV45AB2 Roofer is a Side load (wire collation) Roofing Nailer
The NV45AB2's "magazine, depth of drive, and bullet proof design are excellent; you could probably drive an 18-wheeler over this tool and it would still work," Tools of the Trade Magazine, July/August 2005. The 1-3/4" Roofing Nailer is used for various construction works such as the installation of asphalt roofing shingles and the installation of insulation boards. The NV45AB2 has a side load magazine.
More |
|
|
|
|
|
 |
|
 |
|
Features
- 5.5lbs, lightweight and well balanced for easy maneuverability
- Side loading magazine, convenient and easy for quick replenishment
- ool-less depth of drive adjustment, for precision nailing/flush driving
- Carbide tipped push lever, reduces wear
- Rubber pads, help keep nailer from sliding off roof when not in use
- Quick driving, for maximum efficiency
- Pneumatic power feed and return, allows tool to operate in the harshest conditions
- Long-lasting rubber grip, for added comfort
- Available equipped with power pack- NV45AB2H (5.7lbs)
Specifications
Fastener Diameter Range 0.120
Magazine Capacity 120
Magazine Loading Side
Air Inlet 3/8"
Operating Pressure 70-120psi
Jam Clearing Open-nose
Depth Setting Tool-Less
Actuation Contact, Sequential Optional
L x W x H 9-27/32" x 4-5/8" x 10-3/8"
Tool Weight 5.5 lbs
Fastener Type Coil, Wire Collation
Magazine Angle 16-Degrees
Fastener Length Capacity 7/8" to 1-3/4"
Includes
- Safety Glasses
- Hex Bar Wrenches (2)
|
|
|
 |
|
 |
| Accessories for this product... |
|
|
|
|
