Size | 16 x 40 |
Digital Readout | Newall DP700 |
|
|
|
Swing Over Bed (In.) | 16 |
Swing Over Cross Slide (In.) | 10 |
Swing Through Gap (In.) | 23-5/8 |
Length of Gap (In.) | 7-7/8 |
Distance Between Centers (In.) | 40 |
Spindle Bore (In.) | 2 |
Spindle Mount | D1-6 |
Spindle Taper with Sleeve | MT-6 (MT-4) |
Number of Spindle Speeds | 12 |
Range of Spindle Speeds (RPM) | 42 - 1,800 |
Number of Longitudinal and Cross Feed Rates | 122 |
Range of Longitudinal Feeds (IPR) | .0015 - .0913 |
Range of Cross Feeds (IPR) | .0006 - .0365 |
Number of Inch Threads | 61 |
Range of Inch Threads (TPI) | 1-5/8 - 72 |
Number of Metric Threads | 24 |
Range of Metric Threads | 0.5 - 20 |
Max Tool Size (In.) | 1 x 1 |
Compound Slide Travel (In.) | 5-1/8 |
Cross Slide Travel (In.) | 10-13/16 |
Carriage Travel (In.) | 36-3/8 |
Tailstock Spindle Travel (In.) | 6 |
Taper in Tailstock Spindle | MT-4 |
Follow Rest Capacity (In.) | 1/2 - 3-1/8 |
Steady Rest Capacity (In.) | 7/16 - 3-15/16 |
Width of Bed (In.) | 12-1/4 |
|
Motor (HP) | 2-Speed, 230V, 3Ph |
High Speed (HP) | 7-1/2 |
Low Speed (HP) | 5 |
Prewired (V.) | 230 |
Weight (Lbs.) | 3,877 |
Overall Dimensions (L x W x H) (In.) | 91 x 42-1/8 x 49 |
Drive | Geared Head |
Style (Type) | Engine - Geared Head |