Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol.
Two layers of insulation provide protection against electric shock.
Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool.
A flame retardant, impact-resistant, bright orange outer coating.
Crimping die behind hinge for superior leverage crimping non-insulated connectors, lugs and terminals.
Toothed pipe-grip for greater power.
Integral guards help prevent hand contact with conductive parts.
Jaw Length
1-25/32'' (45 mm)
Jaw Width
1-1/32'' (26 mm)
Knife Length
3/4'' (19 mm)
Jaw Thickness
1/2'' (13 mm)
Nose Type
Overall Length
8-7/8'' (225 mm)
Handle Finish
insulated
Handle Color
orange
Weight (lbs.)
.89
Weight (kg)
Only use tools that are marked with the official international 1000-volt rating symbol shown above, if there is any chance that the tools will make contact with an energized source.
Whenever possible, always de-energize lines and equipment prior to working on or around them. Klein insulated tools are designed only to reduce the chance of injury where the tool may make contact with an energized source.
Do NOT touch uninsulated portion of the tool or any conductive object when either might contact an energized source.
Do NOT touch uninsulated portion of the tool or any conductive object when either might contact an energized source.
Always inspect your tools before use. Destroy tool if insulation becomes damaged in any way.
Because moisture, films, or other surface contaminants are conductive, Klein insulated tools must be kept clean, dry, and free of any surface contaminants.
