Navigate to the www.acetool.com homepage

Same-Day Shipping
On in stock items if order is placed before 3pm est

    Klein Tools 1656-50H Chicago� Grip - with Hot-Line Latch for Bare Conductors

    Klein Tools 1656-50H Chicago Grip with Hot-Line Latch

    Klein Tools
    $0.00
    Product Code: KLE-1656-50H
    Ships in 24 to 48 Hours
    Stock Status: In Stock!

    Klein 1656-50H Chicago Grip - with Hot-Line Latch for Bare Conductors-Wire Pulling GripsChicago Grips - with Hot-Line Latch for Bare Conductors

    Klein Tools 1656-50H Chicago Grip - with Hot-Line Latch for Bare Conductors Features:

    • Hot-line grips for both bare and insulated conductors.
    • Grip may be placed on wire with hot-line stick.
    • When stick is removed, latch closes automatically to guard against grip accidentally disengaging from wire.
    • Standard hot-line grips are not supplied with springs or lock-open features.
    • When springs or lock-open features are desired, add prefix letter ''S'' before catalog number (example: S1684-5H).
    Minimum Cable.74''
    Approx. Weight Each8.50 lbs. (3.9 kg)
    Jaw Length5-1/2'' (140 mm)
    Maximum Safe Load - lbs8000 lbs. (3629 kg)
    Maximum Cable.86''
    Maximum Safe Load - kg3629 kg
    • Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
    • When used on/near energized lines, ground, insulate, or isolate grip before pulling.
    • Do not exceed rated capacity.
    • Do not exceed rated capacity.
    • Grips are to be used for temporary installation, not for permanent anchorage.

    STAY CONNECTED fbxig