Navigate to the www.acetool.com homepage

Same-Day Shipping
On in stock items if order is placed before 3pm est

    Klein Tools D2000-9NE-INS 9'' (229 mm) Insulated High-Leverage Side-Cutting Pliers 2000 Series�
    Klein Tools D2000-9NE-INS 9'' (229 mm) Insulated High-Leverage Side-Cutting Pliers 2000 Series� - Image 1 of 0
    Klein Tools D2000-9NE-INS 9'' (229 mm) Insulated High-Leverage Side-Cutting Pliers 2000 Series� - Video 2 of 1

    Klein D2000-9NE-INS 9 In Insulated Side-Cutting Pliers

    Klein Tools
    $0.00
    Product Code: KLE-D2000-9NE-INS
    Ships in 24 to 48 Hours
    Stock Status: In Stock!

    Klein Tool D2000-9NE-INS 9 Inch (229 mm) Insulated High-Leverage Side-Cutting Pliers 2000 Series

    Klein Tools D2000-9NE-INS 9'' (229 mm) Insulated High-Leverage Side-Cutting Pliers 2000 Series Features:

    • Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol.
    • Two layers of insulation provide protection against electric shock.
    • Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool.
    • A flame retardant, impact-resistant, bright orange outer coating.
    • High-leverage design provides 46% greater cutting and gripping power than other plier designs.
    • Cuts ACSR, screws, nails, and most hardened wire.
    • Integral guards help prevent hand contact with conductive parts.
    Overall Length9-5/8'' (244 mm)
    Knife Length25/32'' (20 mm)
    Jaw Length1-19/32'' (40 mm)
    Jaw Width1-5/16'' (33 mm)
    Jaw Thickness5/8'' (16 mm)
    Handle Colororange
    Nose TypeNew England
    Handle Finishinsulated
    Weight (lbs.)1.25
    Weight (kg)
    • Only use tools that are marked with the official international 1000-volt rating symbol shown above, if there is any chance that the tools will make contact with an energized source.
    • Whenever possible, always de-energize lines and equipment prior to working on or around them. Klein insulated tools are designed only to reduce the chance of injury where the tool may make contact with an energized source.
    • Do NOT touch uninsulated portion of the tool or any conductive object when either might contact an energized source.
    • Do NOT touch uninsulated portion of the tool or any conductive object when either might contact an energized source.
    • Always inspect your tools before use. Destroy tool if insulation becomes damaged in any way.
    • Because moisture, films, or other surface contaminants are conductive, Klein insulated tools must be kept clean, dry, and free of any surface contaminants.

    STAY CONNECTED fbxig