Klein Tools D333-8 Conduit Locknut and Reaming Pliers
$0.00
Product Code: KLE-D333-8
Usually Ships Within 24 Hours
Stock Status: In Stock!
The Conduit Locknut and Reaming Pliers tighten up to 3/4-inch EMT and 1/2-inch rigid locknuts. The special jaw is designed for locknuts, conduit and caps. Serrated jaws deburr the outside while the nose reams and smooths the inside of conduit up to 3/4-inch EMT. The long-nose design makes it easier to reach into electrical boxes.
The Conduit Locknut and Reaming Pliers tighten up to 3/4-inch EMT and 1/2-inch rigid locknuts. The special jaw is designed for locknuts, conduit and caps. Serrated jaws deburr the outside while the nose reams and smooths the inside of conduit up to 3/4-inch EMT. The long-nose design makes it easier to reach into electrical boxes.
Pliers tighten 1/2-Inch (13 mm) and 3/4-Inch (19 mm) EMT or 1/2-Inch (13 mm) rigid locknuts
Fits liquid tight fittings and caps
Reams and deburrs both inside and outside of conduit
Knurled jaws at nose tip pull wire or fish tape and machined nose fits snugly into locknut wings
Forged in the USA with custom, US-made tool steel for maximum durability
Special Features: Pulls Flat Steel Fish Tape
Jaw Length: 1.625'' (4.1 cm)
Handle Finish: Plastic-Dipped
Weight: 8.8 oz (249 g)
Overall Length: 7.75'' (19.7 cm)
Jaw Width: 0.938'' (2.4 cm)
Handle Color: Yellow
Point Diameter: .19'' x .36'' (0.48 cm x 0.91 cm)
Jaw Thickness: 0.5'' (1.3 cm)
Jaw Capacity: 1.38'' (3.5 cm)
(1) Klein Tools D333-8 Conduit Locknut and Reaming Pliers