 |
 |
 |
|
Makita BHP454Z 18 VOLT 1/2" HAMMER DRILL DRIVER- 4-Pole motor Delivers 560in. lbs. of Maximum Torque
- 2 Speed All Metal Transmission (0-400/0-1,700 RPM Covers a Wide Range of Application
- Shift-Lock Drive System Quickly Shifts Between Drilling, Driving and Hammer Modes
- Compact Design at only 9-9/16" Long and Weighs Only 4.9 lbs. for Reduced Operator Fatigue
|
|
|
|
|
|
 |
|
 |
|
Features
- Makita built 4-pole motor delivers 560 in. lbs of maximum torque
- 2-Speed all Metal transmission (0-400 / 0-1,700 RPM) covers a wide range of drilling, driving and hammer applications
- Shift-Lock drive system quickly shifts between modes
- Compact and lightweight design for reduced operator fatique
- 2 Trigger forward built in LED lights illuminates the work area
- Ergonomics shape fits like a glove with even pressure and easy control
- Soft grip handle provides increased comfort on the job
- Makita lithium-ion battery provides longer run time, 5x lower self discharge (for any time) and 16 firm holding contact terminals (for constant high power)
- 30-minute rapid optimum charger communicates with the battery's built in memory chip throughout the charging process to optimize battery life by actively controlling current, voltage and temperature
- 30 minute rapid optimum charger has a built in fan to cool the battery to produce more lifetime work
- The charger earned the ENERGY STAR label for meeting the strict energy-efficient guidelines set by the US environmental Protection Agency (EPA) and US Department of Energy (DOE)
- 3-year warranty on tool and 1-year warranty on battery and charger
Includes
Specifications
- Capacities: Wood - 2-9/16"
- Steel - 1/2"
- Masonry - 5/8"
- No load speed - 0-400/1,700 RPM
- Blows per minute - 0-6000 / 0-25,5000 BPM
- Maximum Torque - 560 in. lbs
- Battery - 18VDC (3.0Ah)
- Overall length - 9-9/16"
- Net weight - 4.9 lbs (w/battery)
- Shipping Weight - 15 lbs
- Master carton quantity 3
- UPC - 088381-091435
LXT Lithium-ion Tools Warranty
Every Makita 18V and 14.4V LXT Lithium-Ion Industrial Power Tool is thoroughly inspected and tested before leaving the factory. If you are not satisfied with Makita 18V and 14.4V LXT Lithium-Ion tool within 30 days of purchase, return it and Makita will provide a replacement or refund. Every Makita 18V and 14.4V LXT Lithium-Ion tool is warranted to be free of defects from workmanship and materials for the period of THREE YEARS from the date of original purchase. The Makita LXT Lithium-ion battery has a limited one-year warranty. Should any trouble develop during the three-year period, return the COMPLETE tool, freight prepaid, to one of Makita's Factory or Authorized Service Centers . If inspection shows the trouble is caused by defective workmanship or material, Makita will repair (or at our option, replace) without charge. This warranty does not apply to Makita Accessories, like flashlights.
This Warranty does not apply where:
- Repairs have been made or attempted by others
- Repairs are required because of normal wear and tear
- The tool has been abused, misused or improperly maintained
- Alterations have been made to the tool
In no event shall Makita be liable for any indirect, incidental or consequential damages from the sale or use of the product. This disclaimer applies to both during and after the term of this warranty. Makita disclaims liability for any implied warranties, including implied warranties of "merchantability" and "fitness" for a specific purpose, after the three-year term of this warranty.
This warranty gives you specific legal rights, and you many also have other rights which vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
|
|
|
 |
|
 |
|
