 |
Features
- Percussion action enhances
drilling capacity drilling into masonry
- 14.4v and 18v Lithium-ion
cordless power
- Up to 140Nm of torque
available
- deliver up to 27,600 blows per minute
LXT Lithium-Ion battery and optimum charging system produces 280% total lifetime work with 2x more cycles
- Hybrid 4-Function Tool with impact, hammer, driver and drill all in one tool for all trades
- Hybrid 4-Function Tool drives lag bolts, drills into concrete,
drives screws with clutch settings and drills into wood, metal and
plastic
- Makita built, 4-pole maximum torque motor delivers 1,240 in.lbs. of efficient torque in a compact size
- Compact design at only 7-3/8" length and weighs only 3.9 lbs. for less operator fatigue
- Ergonomic shape fits like a glove with even pressure and easy control
- LXT Lithium-Ion provides longer run time, 5x lower self-discharge
(for use any time) and 16 firm holding contact terminals (for constant
high power)
- 45-minute Optimum Charger and battery communicates throughout the
charging process using the built-in chip in the battery and built-in
CPU chip in the charger. The Charger also uses "Active 3 Control" for
current control, thermal control & voltage control
- 45-minute Optimum Charger (25 minutes for 3.0 Ah batteries) has a built-in fan to cool the battery to produce more lifetime work
- Built-in LED lights illuminates the work area
- 3-year warranty on tool and 1-year warranty on battery
Includes
|
- 2 LXT Lithium-Ion 3.0Ah batteries (194205-3)
- 45-minute Optimum Charger (DC18RA)
- Tool case (8247535)
|
Specifications
Capacity |
Hex Shank |
1/4" |
| Impact |
|
|
| |
No Load RPM |
0-2,300 |
| |
Impacts/Min.(IPM) |
0-3,200 |
| |
Torque (in.-lbs.) |
1,280 |
| Hammer Drill |
|
|
| |
Blows/Min.(BPM) |
|
| |
Low |
0-2,300 |
| |
High |
0-27,600 |
| Drill |
|
|
| |
No Load RPM |
|
| |
Low |
0-700 |
| |
High |
0-2,300 |
| Driver |
Clutch Settings |
16 |
| Watt Hours |
|
54.0 |
| Battery (Ah) |
|
3.0 (Li-ion) |
| Length |
|
7-3/8" |
| Net Weight (lbs. w/battery) |
|
3.9 |
|
|
|
LXT Lithium-ion Tools Warranty
Every Makita 18V and 14.4V LXT Lithium-Ion Industrial Power Tool is thoroughly inspected and tested before leaving the factory. If you are not satisfied with Makita 18V and 14.4V LXT Lithium-Ion tool within 30 days of purchase, return it and Makita will provide a replacement or refund. Every Makita 18V and 14.4V LXT Lithium-Ion tool is warranted to be free of defects from workmanship and materials for the period of THREE YEARS from the date of original purchase. The Makita LXT Lithium-ion battery has a limited one-year warranty. Should any trouble develop during the three-year period, return the COMPLETE tool, freight prepaid, to one of Makita's Factory or Authorized Service Centers . If inspection shows the trouble is caused by defective workmanship or material, Makita will repair (or at our option, replace) without charge. This warranty does not apply to Makita Accessories, like flashlights.
This Warranty does not apply where:
- Repairs have been made or attempted by others
- Repairs are required because of normal wear and tear
- The tool has been abused, misused or improperly maintained
- Alterations have been made to the tool
In no event shall Makita be liable for any indirect, incidental or consequential damages from the sale or use of the product. This disclaimer applies to both during and after the term of this warranty. Makita disclaims liability for any implied warranties, including implied warranties of "merchantability" and "fitness" for a specific purpose, after the three-year term of this warranty.
This warranty gives you specific legal rights, and you many also have other rights which vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
|
|
|
