 |
Features
Five-stage, foam-paper-nylon system with Advanced Directional Air Flow provides very clean air for better saw performance
- Reinforced aluminum blade guard with 70° range of limitless positioning using a marked knob handle
- Improved ignition system with larger flywheel and rare earth magnets for more power
- Cutting arm position simply changes from center position to flush
(outboard) position allowing cuts directly adjacent to curb edges,
walls or directly above the ground
- Starter grip and decompression valve located on the same side for faster starting
- On-Off-Choke operating switch on a single lever for operator convenience
- Cushioned operator grips with 4 vibration-absorption rubber buffers for increased operator comfort
- Water kit is assembled to saw and can be used with garden hose, gravity tank or pressure tank
- Improved exhaust emissions are EPA Phase II compliant while maintaining power and performance
|
INCLUDES:
|
-
16" Abrasive Wheel (966-161-020)
-
Universal Wrench (941-719-140)
-
Torx Key (940-827-000)
-
Screwdriver (944-340-001)
-
Adapter ring (20mm to 1") (394-228-121)
-
| Optional Accessories: | - Dolly w/ water tank (DT2000)
|
|
|
Engine
|
|
|
|
|
Displacement (cu.in.)
|
4.9
|
|
|
Max. power (HP)
|
6.2
|
|
|
No Load RPM
|
9,350
|
|
Fuel
|
|
|
|
|
Fuel mixture
|
50:1
|
|
|
Fuel tank capacity (oz.) |
37
|
|
Blades
|
|
|
|
|
Max. spindle speed
|
3,765
|
|
|
Wheel diameter
|
16"
|
|
|
Arbor
|
20mm
|
|
|
Max. cutting depth
|
5-3/4"
|
|
Net Weight (lbs.)
|
|
23.9
|
|
Shipping Weight (lbs.)
|
|
32.0
|
|
UPC Code
|
|
088381323178
| |
Warranty
Every Makita tool is thoroughly inspected and tested before leaving the factory. If you are not satisfied with any Makita tool within 30 days of purchase, return it and Makita will provide a replacement or refund. Each Makita tool is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase. Should any trouble develop during this one-year period, return the COMPLETE tool, freight prepaid, to one of Makita's Factory or Authorized Service Centers .
|
|
|
