 |
 |
 |
|
Makita Tool LXT1200 LXT Cordless 18 Volt Lithium-Ion 12-Piece Combo Kit
Hammer Driver-Drill, 6-1/2 Inch Circular Saw, Reciprocating Saw, LXT Impact Driver, 7/8-Inch SDS-Plus Rotary Hammer, 4-1/2 Inch Cut-Off/Angle Grinder, 3/8-Inch Angle Drill, Drywall Screwdriver, 1/2-Inch Impact Wrench, Rechargeable Flashlight, Rechargeable Flourescent/Incandescent Flashlight and a Job Site Radio |
|
|
|
|
|
 |
|
 |
|
Features
LXT Lithium-Ion battery and optimum charging system produces 430% total lifetime work with 2.5x more cycles
- 1/2" Hammer Driver-Drill has a new 4-pole motor for 450 in. lbs. of torque and weighs only 3.9 lbs.
- 6-1/2" Circular Saw has a D35 high torque motor that delivers maximum power for cutting 2x material at 45° and is only 6.9 lbs.
- Reciprocating Saw with tool-less blade changes & shoe adjustments at only 8.1 lbs.
- Impact Driver is 40% more compact, 1,330 in.lbs. of torque with 0-3,200 IPM and is 3.3 lbs
- 4-1/2" Cordless Cut-Off/Angle Grinder produces an impressive 10,000 RPM for 50% faster grinding
- ½” Impact Wrench delivers 170 ft. lbs. of torque with 0-3,000 IPM in a compact design weighing only 3.7 lbs.
- 7/8” SDS-Plus Rotary Hammer packs power and speed in all three modes: rotation only, hammering with rotation, or hammering only
- 3/8” Angle Drill with ultra low profile keyed chuck, built-in L.E.D. job light, and paddle switch for work in tight spaces
- Drywall Screwdriver with an impressive speed (4,000 RPM) designed to handle fastening to metal or wood studs
- Dual Fluorescent / Incandescent Flashlight has a built-in hanger and runs approximately 4 hours in fluorescent mode
- 4-Position Flashlight with Xenon bulbs runs 4.3 hrs.
- Rugged FM/AM job site radio with 10 Pre-Set buttons and mp3 compatible (auxiliary jack)
- Makita
Lithium-Ion provides longer run time, 5x lower self-discharge (for use
any time) & 16 firm holding contact terminals (for constant high
power)
- 30-Minute
Rapid Optimum Charger communicates with the battery's built-in chip
throughout the charging process to optimize battery life by actively
controlling current, voltage and temperature
- 30-Minute Rapid Optimum Charger has a built-in fan to cool the battery to produce more lifetime work
- 3-year warranty on tool and 1-year warranty on battery and charger
Includes:
- 3 ea. LXT Lithium-Ion 3.0Ah batteries (BL1830)
- 1 Rapid Optimum Battery Charger (DC18RA)
- Contractor bag with wheels and telescoping handle (831269-3)
- Contractor bag (831284-7)
- 18V LXT ½” Hammer Driver-Drill (BHP452)
- 18V LXT 6-1/2” Circular Saw (BSS611)
- 18V LXT Recipro Saw (BJR182)
- 18V LXT Impact Driver (BTD141)
- 18V LXT 4-1/2" Cut-Off/Angle Grinder (BGA452)
- 18V LXT ½” Impact Wrench (BTW251)
- 18V LXT 7/8” SDS-Plus Rotary Hammer (BHR240)
- 18V LXT 3/8” Angle Drill (BDA350)
- 18V LXT Drywall Screwdriver (BFS450)
- 18V LXT Fluorescent/Incandescent Flashlight (BML184)
- 18V LXT Flashlight (BML185)
- 18V LXT FM/AM Job Site Radio (BMR100W)
This is the Latest Makita Combo Kit
Makita 18v Lithium Ion LXT Combo Kit Warranty
| LXT Lithium-ion Tools |
Every
Makita 18V and 14.4V LXT Lithium-Ion Industrial Power Tool is
thoroughly inspected and tested before leaving the factory. If you are
not satisfied with Makita 18V and 14.4V LXT Lithium-Ion tool within 30
days of purchase, return it and Makita will provide a replacement or
refund. Every Makita 18V and 14.4V LXT Lithium-Ion tool is warranted to
be free of defects from workmanship and materials for the period of
THREE YEARS from the date of original purchase. The Makita LXT
Lithium-ion battery has a limited one-year warranty. Should any trouble
develop during the three-year period, return the COMPLETE tool, freight
prepaid, to one of Makita's Factory or Authorized Service Centers . If
inspection shows the trouble is caused by defective workmanship or
material, Makita will repair (or at our option, replace) without
charge. This warranty does not apply to Makita Accessories, like
flashlights.
The following LXT
Lithium-Ion power tool models qualify for the three-year warranty:
BCS550, BCS550Z, BDF451, BDF451Z, BDF452HW, BGA452, BGA452Z, BHP451,
BHP451Z, BHR240, BHR240Z, BJR181, BJR181Z, BPB180, BPB180Z, BSS610,
BSS610Z, BTD130FW, BTD140, BTD140Z, BTP140, BTP140Z, BVR450,
BVR450Z, BVR850, BVR850Z, LXT202, LXT400, LXT401, LXT402, LXT601
This Warranty does not apply where: |
- Repairs have been made or attempted by others
- Repairs are required because of normal wear and tear
- The tool has been abused, misused or improperly maintained
- Alterations have been made to the tool
In
no event shall Makita be liable for any indirect, incidental or
consequential damages from the sale or use of the product. This
disclaimer applies to both during and after the term of this warranty.
Makita disclaims liability for any implied warranties, including
implied warranties of "merchantability" and "fitness" for a specific
purpose, after the three-year term of this warranty.
This
warranty gives you specific legal rights, and you many also have other
rights which vary from state to state. Some states do not allow the
exclusion or limitation of incidental or consequential damages, so the
above limitation or exclusion may not apply to you. |
| All Makita Tools |
Every Makita tool is thoroughly inspected and tested before leaving the
factory. If you are not satisfied with any Makita tool within 30 days
of purchase, return it and Makita will provide a replacement or refund.
Each Makita tool is warranted to be free of defects from workmanship
and materials for the period of ONE YEAR from the date of original
purchase. Should any trouble develop during this one-year period,
return the COMPLETE tool, freight prepaid, to one of Makita's Factory
or Authorized Service Centers .
If
inspection shows the trouble is caused by defective workmanship or
material, Makita will repair (or at our option, replace without
charge.) This Warranty does not apply where:
This Warranty does not apply where: |
- Repairs have been made or attempted by others
- Repairs are required because of normal wear and tear
- The tool has been abused, misused or improperly maintained
- Alterations have been made to the tool
In
no event shall Makita be liable for any indirect, incidental or
consequential damages from the sale or use of the product. This
disclaimer applies to both during and after the term of this warranty.
Makita disclaims liability for any implied warranties, including
implied warranties of "merchantability" and "fitness" for a specific
purpose, after the one-year term of this warranty.
This
warranty gives you specific legal rights, and you many also have other
rights which vary from state to state. Some states do not allow the
exclusion or limitation of incidental or consequential damages, so the
above limitation or exclusion may not apply to you. |
|
|
|
 |
|
 |
| Accessories for this product... |
|
|
|
|
