 |
 |
 |
|
Milwaukee Tool 4270-20 Magnetic Drill Press Small
For remote drilling in metal, the 4270-20 is a great choice. The entire tool weighs just 26-1/2 pounds and has a comfortable carrying handle well positioned for balance, with cutter wrenches stored on-board. This is a very portable machine. However, power was not sacrificed for portability. This drill press includes a very powerful 1.1 maximum horsepower, 9.0 amp motor. It can drill up to 1-1/2 in. diameter holes through 2 in. thick steel with annular cutters, or 1/2 in. diameter holes 4-1/4 in. deep with twist drill bits. The tool is setup to accept standard 3/4 in. Weldon shank cutters, or an optional 3-jaw chuck is available for use with twist drill bits. The strong two-coil magnet provides 2,300 lbs. of deadlift force on 1 in. thick steel. The simple two-button control panel is located on the back, away from feed handle obstruction. The feed handle can be conveniently relocated to the opposite side without the use of tools. |
|
|
|
|
|
 |
|
 |
|
Features
- Powerful 9.0 amp 1.1 max HP motor
- Light weight, only 26.5 lbs. with comfortable carrying handle
- Capacity to cut up to 1-1/2 in. diameter holes thru 2 in. steel with annular cutters, or 1/2 in. diameter holes, 4-1/4 in. deep with twist drill bits
- Strong two-coil magnet
- Two positions for feed handle - relocate without tools
- Simple two-button control panel - unobstructed by feed handle
Milwaukee 4270-20 Compact Electromagnetic Drill Press Includes- Lubricant Spray Bottle
- Nylon Safety Strap
- Two Hex Wrenches
Milwaukee 4270-20 Specifications:
Voltage
|
120 AC
|
 |
|
Amps
|
9.0
|
|
|
Drill Capacity
|
1/2 in.
|
|
|
No Load Speed
|
450 RPM
|
|
|
Cord Type
|
8 ft. Fixed
|
|
|
Construction Type
|
Grounded
|
|
|
Electronic Feedback
|
Yes
|
|
|
Tap Capacity
|
--
|
|
|
Drill Point Pressure
|
750 lbs.
|
|
|
Adjustable Base
|
No
|
|
|
Drill Travel
|
6.6 in.
|
|
|
Chuck or Taper
|
Weldon
|
|
|
Tool Weight
|
26.5 lbs.
|
|
|
Shipping Weight
|
35.0 lbs.
|
Milwaukee Tool Warranty
Every MILWAUKEE product is warranted to the original purchaser only to be free from defects in material and workmanship. Subject to certain exceptions, MILWAUKEE will repair or replace any part on a product which, after examination, is determined by MILWAUKEE to be defective in material or workmanship for a period of five (5) years* after the date of purchase. Return the product and a copy of proof of purchase to a MILWAUKEE factory Service /Sales Support Branch location or MILWAUKEE Authorized Service Station, freight prepaid and insured. This warranty does not apply to damage that MILWAUKEE determines to be from repairs made or attempted by anyone other than MILWAUKEE authorized personnel, misuse, alterations, abuse, normal wear and tear, lack of maintenance, or accidents.
|
|
|
 |
|
 |
| Accessories for this product... |
|
|
|
|
