 |
 |
 |
|
Porter-Cable PIN100 Headless Pin Nailer Kit.
This model from Porter-Cable is one of the newest additions to a vast line of pneumatic nailers. The PIN100 is perfect for hobbies, intricate work, or just using the pin as a "hold-down" while your glue dries. The hole produced with the pin is so small that a wipe with a damp rag makes the hole virtually invisible to the naked eye. Although this unit is small and lightweight, it is not lacking on performance or features. The PIN100 will shoot all 23 gauge pin nails from 1/2-inch to 1-inch in length and features an automatic magazine adjustment to accommodate the length of pin, a feature you won't find on any other pinner, all others have a manual adjustment that takes time to adjust each time you use a different length of pin. The bottom load magazine holds 170 pins and provides a visual signal when the magazine is getting low on pins. The handle utilizes a rubber grip for comfort and better control and the rear exhaust means you won't have to worry about having exhaust blow in your face. Complete with pinner, carrying case, 2,000 3/4-inch pins, oil, 1/4-inch coupler, and wrenches. |
|
|
|
|
|
 |
|
 |
|
Features
- Uses 23 Ga. micro pin nails similar to Senco models
- From 1/2" to 1" long
- Tool automatically adjusts for different fastener lengths. Easier loading and less problems with pins out of spec.
- Bottom load magazine holds 170 pin micro nails
- Dual trigger feature
- Nail reload indicator
- Rubber comfort grip on tool handle
- Rear exhaust design to keep oil condensation away from work
-
Standard
Equipment: Nailer, box of 2,000 pin nails of 3/4",, 1/4" plug with cap,
oil, wrench, carrying case, and operating manual
Specifications
Fastener Type (Inches)
23 Ga. Pin Nails
Fastener Range (In)
1/2 to 1
Magazine Capacity
170 Pins
Operating Pressure
60-100 psi
Firing Modes
Dual Trigger
Height (Inches)
6-1/4
Length (Inches)
9
Weight (Lbs.)
2
Shipping Weight (Lbs.)
4-1/2
Uses 23 Ga. 1/2" - 1" micro pin nails, Automatically adjusts for nail
length, Holds 170 nails, Includes 2000 3/4" pin nails, oil, wrenches
and carrying case.
|
|
|
 |
|
 |
| Accessories for this product... |
|
|
|
|
