Klein D220-7-INS 7 In Insulated Diagonal-Cutting Pliers
$0.00
Product Code: KLE-D220-7-INS
Ships in 24 to 48 Hours
Stock Status: In Stock!
Klein D220-7-INS 7 Inch (178 mm) Insulated Heavy-Duty Diagonal-Cutting Pliers - Tapered Nose
Klein Tools D220-7-INS 7'' (178 mm) Insulated Heavy-Duty Diagonal-Cutting Pliers - Tapered Nose Features:
Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol.
Two layers of insulation provide protection against electric shock.
Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool.
A flame retardant, impact-resistant, bright orange outer coating.
Heavy-duty tapered nose design.
One-inch deep jaws easily reach into confined spaces.
Integral guards help prevent hand contact with conductive parts.
Jaw Length
1'' (25 mm)
Jaw Thickness
1/2'' (13 mm)
Jaw Width
31/32'' (25 mm)
Handle Finish
insulated
Cutting Knives
standard
Handle Color
orange
Overall Length
7-7/8'' (200 mm)
Weight (lbs.)
.66
Weight (kg)
Only use tools that are marked with the official international 1000-volt rating symbol shown above, if there is any chance that the tools will make contact with an energized source.
Whenever possible, always de-energize lines and equipment prior to working on or around them. Klein insulated tools are designed only to reduce the chance of injury where the tool may make contact with an energized source.
Do NOT touch uninsulated portion of the tool or any conductive object when either might contact an energized source.
Do NOT touch uninsulated portion of the tool or any conductive object when either might contact an energized source.
Always inspect your tools before use. Destroy tool if insulation becomes damaged in any way.
Because moisture, films, or other surface contaminants are conductive, Klein insulated tools must be kept clean, dry, and free of any surface contaminants.
