Klein S1684-74H Chicago Grip - Curved-Jaw Grip for EHS Cable-Wire Pulling GripsChicago Grips - Curved-Jaw Grips for EHS Cable

Klein Tools S1684-74H Chicago Grip - Curved-Jaw Grip for EHS Cable Features:

• When pulling EHS (extra-high-strength) galvanized-steel cable, the galvanizing has a tendency to coat the jaws of any grip, causing the cable to slip.
• To reduce the possibility of slippage and damage to the cable, the jaws of this grip are milled on a curve with a double ''V'' contour.
• Available with hot-line latch and spring.

• Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
• When used on/near energized lines, ground, insulate, or isolate grip before pulling.
• Do not exceed rated capacity.
• Do not exceed rated capacity.
• Grips are to be used for temporary installation, not for permanent anchorage.