You are here: Home > Festool > Festool Circular Saws > Festool Circular Saw Accessories > Festool Guide Rails
Sort By:
Page of 1
Festool 482107  Guide Rail Connector-Guide Rails : Kits and Other Accessories Festool 491503  75" Guide Rail FS 1900-Guide Rails : Tracks Festool 491498  55" Guide Rail FS 1400-Guide Rails : Tracks
Festool 495209  197" Clear Splinterguard (5000mm)-Guide Rails : Splinterguards Festool 496939  32 mm Hole Drilling Guide Rail, 55" (1400 mm)-Guide Rails : Tracks Festool 497657  Guide Rail Accessory Kit-Guide Rails : Kits and Other Accessories
Festool 201182  Parallel Guides-Guide Rails : Parallel Guide Festool 201183  Parallel Guide Extensions-Guide Rails : Parallel Guide Festool 769941 Guide Rail FSK 250
Festool 201182 Parallel Guides
Ace Tool Price: $288.00
Festool 769941 Guide Rail FSK 250
Ace Tool Price: $150.00
Festool 491622  32 mm Hole Drilling Guide Rail, 95-13/32" (2424 mm)-Guide Rails : Tracks Festool 491499  32" Guide Rail FS 800-Guide Rails : Tracks Festool 466357  Guide Rail Tote Bag-Guide Rails : Kits and Other Accessories
Festool 466357 Guide Rail Tote Bag
Ace Tool Price: $104.00
Festool 769942 Guide Rail FSK 420 Festool 491582  Limit Stop-Track Saws : Stops and Accessories Festool 494340  LR 32 Guide Plate-Routers : Hole Drilling System
Festool 769942 Guide Rail FSK 420
Ace Tool Price: $175.00
Festool 491582 Limit Stop
Ace Tool Price: $13.00
Festool 494340 LR 32 Guide Plate
Ace Tool Price: $132.00
Festool 491937  106" Guide Rail FS 2700-Guide Rails : Tracks Festool 491501  118" Guide Rail FS 3000-Guide Rails : Tracks Festool 491741  Glide Strip-Guide Rails : Splinterguards
Festool 491741 Glide Strip
Ace Tool Price: $38.00
Festool 495207  55" Clear Splinterguard (1400mm)-Guide Rails : Splinterguards Festool 200160 Guide Rail Tote Bag FSK420 Festool 491469  Parallel Guide-Track Saws : Stops and Accessories
Festool 491469 Parallel Guide
Ace Tool Price: $68.00
Festool 488752  Guide Stop-Routers : Edge Guides, Stops and Circles Festool 491504  42" Guide Rail FS 1080-Guide Rails : Tracks Festool 491500  197" Guide Rail FS 5000-Guide Rails : Tracks
Festool 488752 Guide Stop
Ace Tool Price: $44.00
Festool 491588  Angle Unit-Guide Rails : Kits and Other Accessories Festool 485724  Non-Skid Strip-Guide Rails : Splinterguards Festool 491594  Quick Clamp-Guide Rails : Clamps
Festool 491588 Angle Unit
Ace Tool Price: $104.00
Festool 485724 Non-Skid Strip
Ace Tool Price: $28.00
Festool 491594 Quick Clamp
Ace Tool Price: $40.00
Festool P00108  Parallel Guide Set-Guide Rails : Parallel Guide Festool 495717 Parallel Guides For FS Guide Rail System Festool 200161 Guide Rail Tote Bag FSK670
Festool P00108 Parallel Guide Set
Ace Tool Price: $335.00
   
 

FESTOOL Guide Rail

Integrated splinterguard Serves as cut line and prevents tear-out and splintering of the cut, for perfect cut results. Glide strip Reduces friction between the tool and the guide rail for easier, more fluid cutting action. System integration Though originally designed for use with Festool plunge cut saws, guide rails are a perfect match for routers and jigsaws. Non-skid, self-clamping strips Dual clamping strips on the bottom prevent movement during the cutting operationăless set-up time and better results. Lightweight Extruded aluminum profile is robust and lightweight. Available in many lengths From 32” (800 mm) to 16.5ę (5000 mm) _ a guide rail for every application. Ability to connect together Create custom lengths, with easy assembly and transport. Clamp integration In addition to the dual non-skid strips, the guide rail incorporates a t-slot underneath for unobtrusive clamping. Limit stops Infinitely adjustable and provides front and rear stop position for accurate and repeatable results.
Replacing the Festool Guide Rail Splinter Guard

Here are some pointers for replacing the rubber splinter guard on the edge of the Festool guide rail: Pull off the old rubber strip Clean off any old adhesive paper that is left on the aluminum. A nylon scraper is good for this because it wonęt gouge the aluminum. Even better is a stick of tight grained hardwood with the tip cleanly cut on a bevel. The end grain seems to snag the rolled up adhesive up quite effectively. If the leftover residue of the original adhesive is still tacky, the new rubber strip can be applied without any further cleaning. However, if the adhesive is old and dried up, it is best to clean the aluminum with acetone or lacquer thinner. Then clean with denatured alcohol because most shop solvents come in metal cans and can be contaminated with a bit of oil. (from the manufacturing process of the metal container) Peel off some of the protective strip from the new rubber splinter guard. Begin the placement of the strip 1/8th to 1/4 – from the end of the guide rail. This helps to prevent snagging the end of the strip when the rail is transported. Lay out the rubber as it comes off the roll without stretching it to line it up. Just watch that the inside edge of the rubber is against the aluminum ridge, but do not stretch the splinter guard rubber. When you reach the end, make sure that it does not butt up to the end of the aluminum. Cut it in _” if necessary. Then squeeze it down with your thumbs all along the rubber strip. To trim the edge of the rubber, set the saw at a shallow depth at about 6 or 7 mm. If you have the fine tooth blade installed, set the speed control down to slowest setting. This will help prevent the rubber from burning onto to the blade teeth. If you have the coarse cut blade with few teeth, run the saw at full speed. It is best to make the first cut with the guide rail on the surface of piece of sacrificial material. Junk plywood or cardboard will do.