Lamello 136312 15mm Cabineo Drill with Short Centering Point 0.8mm
Cabineo is a one-piece cabinet connector which can be used with all CNC machines because only surface machining is required. The Cabineo is installed in the board either in the workshop or on site. The pre-assembled screw in the connector is screwed into the 5 mm hole of the second workpiece using a cordless drill. Cabineo impresses with its time-saving processing and assembly as well as the high clamping force which leads to stable connections without the need for additional dowels. Cabineo is available in white or black.
Efficient machining with all CNC machines
Faster machining and assembly
Stronger connections
For all CNC Machines: Surface machining without addtional drill holes in the edge for wooden dowels. Therefore the maching is possible on simple 3 axis CNC machines also
Drilling or Cutting: The workpiece can be machined either using a drill or a cutter
Reduced to The Essentials: The one-part connector features high clamping force and does not require any additional alignment elements such as wood dowels
Suitable for Use WithShort Centering Point 0.8mm
Size33.8 mm x 16.5 mm x 10.8 mm
Cutter Diameter12 mm
Drill Diameter5 mm - 15 mm
Installation ToleranceLongitudinal 0.1 mm
Material of ConnectorFibre-Glass Reinforced Plastic
TypeCabineo
Tensile Strength~ 900 N 90 kg
Cabineo Size15 mm
(1) Lamello 136312 15mm Cabineo Drill with Short Centering Point 0.8mm